What are the factors that cause the shredder belt loss?

Why the tire shredder equipment is malfunctioning, where it is malfunctioning, and how to solve it are very important, because as long as there is a malfunction, it is thought that the crusher equipment is out of order and it needs to be repaired, which affects many aspects, For example, output, equipment life, etc. Of course, the loss of the belt on the tire recycling machine cannot be forgotten, because if there is no belt drive, then the tire recycling machine may only run a part, which is very dangerous.

Several factors of tire recycling machine belt damage:

1. The tension of the belt is not correct: the tension is too loose, and the power cannot be transmitted well; it is increased; the tension is too tight, the belt wears fast and stretches quickly, shortening the life of the pulley or the belt slips and burns. The belt tension is moderate.

2. The length of multiple belts in the group is uneven, resulting in inconsistent tension in a group of several belts, which is not enough when the belt transmits the power: choose a belt of the same length.

3. The phenomenon of "stuck cars" caused by too much feed volume, or the phenomenon of "stuck cars" caused by excessive reduction of the rotation speed of the ambassador's knife roll. The above are the important factors that cause the wear of the tire shredder belt.