Shredder common problems and solutions

Everyone knows that the parts of the tire shredder equipment are very important, and it affects the whole body, so customers who use the tire recycling machine should pay attention to that the bearing is a more important part of the tire recycling machine. The bearing is overheated, and its performance directly affects the normality of the equipment Operation and production efficiency. During the operation of the tire shredder device, the user should pay special attention to the heating of the bearing and the noise of the bearing part, and the abnormality should be dealt with as soon as possible. My Yuxi mechanical summary usually has the following three common anomalies:

 

The unevenness of one or two bearing seats, or the rotor of the motor and the rotor of the shredder are not concentric, which will cause the bearing to be impacted by additional loads, which will cause the bearing to overheat. In this case, stop and troubleshoot immediately to prevent early bearing damage.

 

2. Too much, too little or aging lubricant in the bearing is also the main cause of bearing overheating and damage. Therefore, according to the requirements of the use book, the lubricant should be filled quantitatively on time. Generally, the lubrication accounts for 70% -80 of the bearing space. %, Too much or too little is good for bearing lubrication and heat transfer. Bearings extend their service life.

 

3. The fit between the bearing cover and the shaft is too tight. If the fit between the bearing and the shaft is too tight or too loose, the bearing will overheat. Once this kind of problem occurs, friction noise and obvious swing will be issued during the operation of the equipment. The bearing should be removed and stopped. Trim the friction area and reassemble as required.

 

You must be careful when using the tire recycling machine equipment, so that it is checked first and used safely if it is normal. People cannot change the wind direction, but they can change the sails; they cannot eradicate hidden dangers, but they can eliminate hidden dangers; they cannot change difficulties, but they can have a positive attitude.