What to do if the output of tire shredder is reduced?

Our country is rich in resources, but in the construction process of these years, it has caused excessive mining. Now there have been more restrictions on the exploitation of resources, and the use of resources has become increasingly tight, so the reuse of waste materials Disposal and utilization have become important, so now the market for the treatment and recycling of waste resources is also hot. Tire recycling machine equipment is a kind of equipment that specializes in the treatment of waste rubber. After processing, the rubber can be made into other finished materials, which can be used continuously after entering the market.

The tire recycling machine is simple and convenient to use and has a high processing output, but after a long period of production, the processing volume will also decrease, which will affect the production volume. So what causes the reduction in production volume? Because the shredder of the tire shredder is mainly shredded by the interaction of two sets of blades on the shaft of the tire shredder, the material of the blade is an alloy material with high hardness, and the general raw material will not cause it. Damage, but in the actual work process, because the materials to be shredded are not sorted, some high-hardness steel materials, such as bearing steel, chain steel, etc. may remain in them. The blade of the tire recycling machine causes damage. After a long shredding operation, the blade becomes sharp, so the output will decrease during the shredding operation.

When such a problem occurs, the blade needs to be polished, and it can still be used. To fundamentally solve this problem, you need to pay attention to the sorting of high-hardness materials when unloading, so that the wear of the blade can be avoided, and the service life of the blade can be prolonged. It is necessary to know that the price of the blade is relatively expensive. It costs a lot of money, so you need to pay attention to the protection of the blade when the tire shredder is operating normally. This can reduce the frequency of blade replacement, and also ensure that the production volume is not reduced, and the production efficiency is improved.