Why does shredder fail after a period of time processing?

The tire recycling machine is used in the shredder operation of waste materials. The manufacturing technology has matured. Why do customers always call after a period of use, and they are all questions about faults? The structure of the tire shredder is simple, and the problem time is concentrated after using for a few months, which has seriously affected the production. In response to this situation, the manufacturer also did a timely return visit inspection. There are also reasons for this problem.

When customers use new equipment, they are always pursuing production volume and neglecting equipment maintenance and maintenance.

The use of tire recycling machine also requires regular maintenance and maintenance like other equipment. In the normal production process, attention should be paid to the operation of the equipment. If abnormality is found, it should be shut down and inspected in time to eliminate the problem in time.

Maintenance should be done during downtime, and trouble shooting should be performed regularly. This is the same as using a car and both require regular maintenance.

Tire recycling machine components that require regular maintenance: reducers, shaft bearings, couplings. Due to the long working hours of the tire shredder, the lubricant consumption of the reducer is large. The gearbox oil should be refilled once every two weeks, and it should be replaced once every six months to ensure the normal operation of the gears inside. Happening. Another is that the shaft of the shredder blade should be filled with lubricating oil once every 3 days. Use high-temperature-resistant lubricating oil. Do not use it if the quality is not good. Lubricating operation cannot be started and the bearing will be damaged. Couplings generally do not require maintenance, but it is necessary to pay attention to whether the connecting nylon pin is broken. It is found that the broken pin is replaced in time. If the coupling is not subjected to uneven force, the coupling will be deformed and damaged for a long time.

As long as the daily maintenance of the tire recycling machine is done well, it won't take much effort to ensure long-term use without problems, and only if the equipment does not have problems, can we get more production.