How to solve the downtime of the tire shredder at work?

The tire shredder needs regular inspection and maintenance during the long-term production process, so as to avoid failures during the production process, and to operate in accordance with the operating specifications of the equipment during the production process. The phenomenon that the tire recycling machine stops during the operation is generally due to the failure of the machine or the cutting of the equipment too quickly, which causes the equipment to freeze, which can easily cause damage to the mechanical power part of the equipment.

The tire shredder will withstand greater torque during operation. Under normal working conditions, its torque is uniform, both the transmission mechanism and the shaft can withstand this force, but in the process of cutting, if the cutting is uneven, the bearing's torque will be suddenly Big and small, so the force will be big and small, and the equipment will be stuck in severe cases. This will cause the risk of the shaft to break during long-term work. It is expected that such a production amount can be stable.

The power transmission of the tire recycling machine is driven by a belt, so pay attention to the tightness and wear of the belt. If the belt is too loose, it will cause insufficient power. The equipment cannot be shredded normally. If the belt is too tight, the belt will be damaged. Severe wear and tear early scrap. Therefore, it is necessary to inspect and maintain the equipment before it is turned on when it is in production, and repair it in time if it finds a problem, otherwise the production volume will be delayed during production.

If the tire recycling machine encounters a sudden shutdown during the production process, it is necessary to immediately pull down the switch for inspection, find the cause of the fault and perform repairs. The equipment cannot be “ill operated”, which will cause greater damage to the equipment. Increase maintenance costs.