Detachable embedded movable cutter

  Customers who have seen the tire shredder may pay attention to details, which means that the blade of the tire shredder rotates in two directions. Some customers are not very familiar with this. Tool rotation of the tire recycling machine is very important for the machine. In practical use, the two knife shafts of the tire shredder have two types of forward rotation. During normal operation, one cutter shaft and one cutter shaft need to be rotated. The two sticks rotate inward, kneading and chopping. If the material gets stuck during the shredding process, it is recommended to use the motor rotation button, then rotate in the opposite direction, and then press the forward button to continue the operation.

  The tire shredder consists of the main body structure of the motor, hardened surface reducer, rotating knife shaft, movable knife, fixed knife, frame, frame, box, hydraulic cylinder, oil pump and cylinder. The fixed tool is installed on the frame, and the rotating tool shaft is provided with a detachable embedded movable tool. The number of movable tools depends on the model and size of the rotating tool axis. The cutter is made of special alloy material. After heat treatment, the hardness reaches HRC60 ° or higher. It has the characteristics of impact resistance, abrasion resistance, heat resistance and no cracking. Therefore, it has a longer service life, stronger cutting ability and higher productivity. The waste material enters the broken casing interior through the feeding system. The box is provided with a tire recycling machine blade. The tire recycling machine blade cuts, squeezes, cuts, etc. the material into small pieces and discharges it from the lower part of the box.