Tire shredder shaft bending will cause energy consumption

  tire shredder is environmentally friendly and energy saving, and is well received by users. In the near future, we find that many users will find that shredder will consume more energy after a period of time. What causes this phenomenon in shredder?

  Since the tire shredder equipment is a continuous testing machine, we have proved that the tire shredder is very energy efficient with actual data, so we attach great importance to this issue. When we arrived at the site for inspection, we found that the main reason for these problems was this. For this reason, we have summarized the main points and solutions. Let's take a look at the main points:

  1.tire shredder bearing damage: The treatment method is to check and repair or replace the bearing.

  2. The speed of the template circuit breaker is too high: the solution is to check the driver and power supply.

  3. Liquid density addition: The processing method is to check the liquid density.

  4. Tire recycling machine shaft bending: The processing method is to correct broken tire recycling machine shaft.

  5. The packaging of the tire recycling machine is pressed too tightly or is dry rubbing: the handling method is to loosen the packaging and check the water seal tube.

  6. Grind the impeller and wear ring, the impeller and the casing, and the treatment method is maintenance.

  7. Loss of axial force balance device: The treatment method is to check whether the balance hole and the oil return pipe are blocked.

  8. The center of the coupling is bad or the axial clearance is too small: the treatment method is to check the alignment and adjust the axial open space.