What is the cause of the shredder motor not rotating

  Tire shredder bearings can well avoid production delays. Metal crusher bearings must be handled with care during installation. Do not strike with iron or rough installation to avoid damage.

  What is the reason why the shredder motor does not rotate? The failure of the motor to rotate normally has a lot to do with the tire shredder, such as the failure of the tire recycling machine bearing, imbalance, or loose tire shredder bearing. Therefore, the metal crusher does not rotate 53%, the electric motor accounts for 47%, and the rotor still has 10% rotation. If the casting defects of the metal crusher also result in unbalanced air gaps, broken strips, etc., 37% of the windings come from the stator. If the motor does not rotate during production using a tire recycling machine, the following tests should be performed.

  First of all, it is necessary to check the voltage of the motor to see if the voltage reaches the standard voltage and cannot exceed the rated voltage. Tire shredder bearings also need to be inspected in detail and must be relubricated. Temperature rise and ventilation detection and motor current detection. During the use of shredder, the smell of the motor of the tire recycling machine should be checked. In order to detect the insulation resistance of the shredder, it is also necessary to detect whether the motor of the tire recycling machine has vibration and abnormal sound.