Operational notes of radiator recycling machine (1)

The radiator recycling machine is a common tool for crushing scrap metal materials. With the continuous improvement of technology, the new radiator shredder can handle various metal materials and is an ideal processing equipment for metal smelting. Then, what are the points of attention for the operation of the radiator recycling machine? What are the daily maintenance methods of the equipment? Let's take a closer look at the "Notes and maintenance methods of the operation of the radiator recycling machine".

[Precautions for operating the radiator recycling machine]

When using the radiator shredder, the employees must be trained to get on the job. This is a problem that every manufacturer will pay attention to. What problems should be paid attention to in the production operation?

1. The operator should stand on the side of the shredder to prevent rebound debris from injuring the face. Do not stop working immediately, idling for 2-3 minutes to completely discharge the material inside the machine. After shutdown, it should be cleaned and maintained.

2. Hammer consumables, can exchange worn corners or corners in the same direction must be hammered U-turn exchange exchange at the same time, replace the new hammer film also replace the entire hammer at the same time, can not use a single hammer Replace with old ones. Consumable parts, such as screen damage screens, can be severely damaged by the riveting and need to be replaced with a new one.