Operating points of radiator recycling machine (2)

3. The radiator recycling machine works for 300 hours to clean the bearings and replace the oil. When stopping the radiator recycling machine for a long time, you should remove the belt.

4. Start the radiator recycling machine idle for 2-3 minutes, check that the rotation of the rotor is correct, the sound is normal.

5. The staff should operate the crusher to feed evenly to prevent blockage of the car and do not overload the work for a long time. If there is vibration, noise, bearing and body temperature is too high, and the sprayed material is outward, stop it immediately and check it out before proceeding.

6. The crushed materials should be inspected carefully, and no other foreign matter such as stones should be mixed to avoid damage to the radiator recycling machine.

7. Whether the connecting bolt of each part before starting the machine is tightened, it is necessary to check whether the tightness of the driving belt is appropriate and whether the power cord is good. The motor shaft shredder shafts are parallel.

8. Drag the belt by hand to check whether the spindle rotation is flexible, with or without card, touch and friction.