waste metal shredder advantages introduction

4.scrap metal metal has low cost of crushing, less loss of consumables in the machine itself, easy maintenance, and can greatly reduce production costs;

5.Waste metal shredder has no secondary pollution in the crushing process. The whole process belongs to pure mechanical crushing. At the same time, the dust removal equipment can effectively reduce the dust pollution on site, and there is no pollution caused by waste water or waste in the production process.

Mainly check whether there is any foreign matter in the crushing chamber (it must be empty before starting the machine).

After starting the motor, the equipment should be turned empty for 1-2 minutes, then gradually feed the broken material from the feeding tray. The feeding should not be too fast. many. If the material is stuck and the motor does not turn, please turn off the power immediately to avoid burning the motor.

After the material is removed, you can continue to use it. It is forbidden to open the motor end cover and belt guard during use, and it is strictly forbidden to feed by hand.

The waste metal shredder can meet the user's satisfaction requirements in terms of the granularity of discharge, and the output is also sufficient to meet the user's requirements. The scrap metal metal has a reasonable internal structure.

In terms of design, the high-humidity material will not block the material when it is broken. Compared with the old crusher, the waste metal shredder is more advanced, the crushing ability is more powerful, and the application range is wide. Welcome to call advisory.