why scrap metal shredder blade is easy to wear?(1-2)

In the past two years, with the strict investigation of environmental protection, garbage recycling is also a major concern of people. However, these aspects of domestic work are still not good enough. Every year, a large amount of domestic garbage, scrap metal, and waste furniture are produced. In the past, our processing technology was not perfect. Nowadays, with the appearance of scrap metal shredders, such scrap metal and used furniture can be well treated and reused.

For example, it can be used to treat household waste, e-waste, industrial waste, agricultural waste and medical waste. Not only that, these wastes can be reused by scrap metal shredder, and recycling and reprocessing can become new resources. While reducing the production costs of various enterprises, it also greatly saves the country's natural resources and also protects the environment.

The blade of the scrap metal crusher is the core component of the entire plant. Improper handling can result in blade wear, shorten blade life and greatly reduce productivity. So what are the incorrect operations that can cause the wear of the waste metal shredder blades?

1. The heat treatment of the waste metal shredder is not suitable, because the hammer head is made of alloy steel, the head is carburized and quenched, and the quenching hardness is HRC60~65. If the heat treatment is not proper, it will wear out very quickly in operation, so we must handle it well. The strength of the phenomenon to minimize heat treatment errors.

2, the blade thickness of the scrap metal crusher is small, commonly used rectangular double pin hole hammer, its service life is 200~500 hours, the thickness is small but the weight can be reduced and the shredding productivity is improved, but the life is short, the general multifunctional shredder The hammer is 2~3mm, and the other hard materials are 6~8mm. It can be seen that the hammer with a small thickness is more suitable for the production of the double-shaft shredder.