why the scrap metal shredder blade is easy to wear?(3-4)

The blade of the scrap metal crusher is the core component of the entire plant. Improper handling can result in blade wear, shorten blade life and greatly reduce productivity. So what are the incorrect operations that can cause the wear of the waste metal shredder blades?

3, the amount of suction is too large, equipment - generally adopt the suction method to reduce the temperature and humidity inside the machine, and to avoid dust leakage, but too much suction will also form uneven wear of the hammer, the air volume should be properly controlled.

4. The gap between the hammer head and the screen of scrap metal crusher should not be too small, generally guaranteed to be 4~12mm, and the hard material is 10~14mm.

The wear of most waste metal shredder blades is not consistent with the material of the hammer and the crusher. Therefore, if the blade wears out, we should first check whether it is caused by the material. If the hammer does not match the material, Changes need to be made in advance, which can greatly increase the service life of the waste metal shredder.