How the shredder can occupy an important position in the market (3-4)

3. Has a higher crushing ratio. The waste metal shredder is 2-3 times higher than a conventional single-shaft shredder. A typical uniaxial shredder does not use a hit method to cause the shaft to affect the material. When the material passes through the tear chamber of a conventional uniaxial waste metal shredder, the force is small. The size of the force is limited by the kinematics of the scrap metal crusher, resulting in a relatively small amount of fragmentation, resulting in multiple stages of the system.

The waste metal shredder produces a high frequency pulsating vibration force equivalent to a fixed pulse. If the ore is very hard, a full elastic collision occurs and the action time is very short.

In theory, very high forces can be achieved and the material is located in the tear chamber. When moving from top to bottom, the angle of the material changes constantly, so the angle of action of the force changes constantly.

3. When the non-tearable material passes, the equipment mechanism will not be damaged. The waste metal shredder uses a moving shaft for faster impact. With inertial drive, the position of the two moving axes is not limited by the kinematic parameters.

When the material cannot be shredded, the movement of the shredder will automatically drain from the material. Discharge does not require any downtime and will not damage the equipment. It only affects the discharge size during this time.

A typical single-shaft scrap metal crusher is a rigid transmission that strictly follows the motion path. If an external object prevents it from completing the trajectory, it will destroy the weak points in kinematics, such as a single-axis shredder. Elbow wrench, safety pin, etc.

The above is the performance advantage of the waste metal shredder. The current shredder market is constantly developing, and the benign competition among various enterprises is also continually promoting the rapid development of the shredder technology.

This is also the reason why scrap metal crusher occupy an important position in the market.