How shredder manufacturers maintain and maintain machinery

Tire shredder is a kind of coarse crushing machine, which is generally used to process raw materials or scraps to make them smaller. So how do general tire shredder manufacturers perform maintenance on the machine? Yuxi Machinery will briefly describe it for everyone.

1. The tire recycling machine should be placed in a ventilation position to ensure that the working heat of the motor is dissipated and its life is extended.

2. Lubricate the bearings regularly to ensure the lubricity between the bearings.

3. Regularly check the cutter screws of the tire shredder. After using the new tire recycling machine for 1 hour, use the tool to tighten the screws of the moving knife and fixed knife to strengthen the fixation between the blade and the knife holder.

4. In order to ensure the sharpness of the cutting edge of the tool, the tool should be inspected frequently to ensure its sharpness and reduce unnecessary damage to other components caused by the blunt lack of the blade.

5. When changing the cutter, the gap between the moving knife and the fixed knife: 0.8MM crusher above 20HP is better, 0.5MM crusher below 20HP is better. The thinner the recycled material is, the larger the gap can be adjusted.

6. Before the second start, the remaining debris in the machine room should be removed first to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to remove the dust outlet under the flange, because the powder discharged from the tire recycling machine room enters the shaft bearing.

7. The machine should be well grounded.

8. Regularly check whether the tire shredder belt is slack and tighten it in time.

Only if the tire shredder manufacturer performs regular maintenance and maintenance on the machine, can it better use the machine, increase the service life of the machine, and reduce the cost of the tire recycling machine manufacturer to a certain extent.