tire shredder reasonable use and maintenance(2)

7. Due to the high crushing efficiency of the tire recycling machine, during the running process, the debris in the receiving hopper should be frequently observed. If the host machine is stuck, the feeding should be stopped immediately. In the "manual" state, the feeding box is slightly Push to reverse the host, and then continue working after normal.

Installation and commissioning of tire shredder

1. After the tire recycling machine is installed, check whether the bolts of each part of the machine are loose (especially the blade fastening bolts);

2. Check that the oil level of the hydraulic system should not be lower than the center line of the oil standard. There should be no oil leakage from the joints of all parts. Check whether the bearings and reducers are well lubricated and whether the reducers are cooled by water. Then turn on the power and jog the machine. Check whether the direction of rotation is correct, whether there are abnormal sounds, whether the oil cylinder of tire shredder moves accurately and smoothly, and whether the hydraulic system is leaking; after confirming that everything is normal, you can officially start working.