Large feed port shredder does not need to do any pre-treatment

Once used tires were cut with a cutting machine and then sold, so the price is not high and it is not easy to transport. Now there is a new type of tire recycling machine that can easily dispose of used tires in one stop. Tire recycling machine is a crushing equipment specially designed for tires with large volume, thickness and hardness. It can shred rubber tires, bias tires, radial tires, and automobile tires. After the tire is shredded, it can be ground into powder and processed by powder mill equipment. The tire shredder can directly crush any steel tire with a diameter of less than 2000mm without any prior treatment of the tire, and it can directly crush the rim steel wire. Greatly improve the production power, and also save labor.

Tire shredder consists of motor, reducer, rotating knife shaft, imported moving knife, fixed knife, frame, base, box, etc.

There are 11 fixed knives on the tire recycling machine, and 44 detachable embedded movable knives on the rotating knife shaft. The movable knives are double-sided knives that can be used. Remove and replace the point of view until the knives are blunt. ， Because it is a claw type moving knife, rotary cutting, and the fixed knife and moving knife are made of SKD11 imported from Japan. After heat treatment, the hardness reaches HRC60 ° or higher. Therefore, it has a long service life, strong cutting ability, high production capacity, and normal use. The knife needs to be sharpened for more than 1,000 tons. It is used with a conveyor belt, a two-stage crusher, a wire separator, a nylon separator, and a grinder. Therefore, it is automated, rationalized, and labor-saving. Reduce labor intensity and improve working environment.