tire shredder Easily remove environmental concerns

Faced with a large number of waste tires, not only residents, but also environmental protection departments are also troubled. Because the volume is too large to be placed in an incinerator for incineration power generation, and because it is too hard to be filled and compacted, it is transported to a landfill and takes up a lot of space. Although bothersome, they are all recyclables, including metals, rubber, wood, etc., which can be recycled. tire shredder

The best place for large-scale domestic garbage is to reduce the amount of pollutants from the source, reduce the amount of pollutants, and crush and classify them into resources without damage. The large-scale domestic waste shredder is beneficial to improve the urban sewage classification and treatment system, reduce the storage consumption of the landfill site, and promote the recovery and utilization of urban sewage.

Tire shredder mainly relies on the "shear" principle to complete the solid waste crushing process. The tire recycling machine motor-driven reducer transmits torque to the shredder's mobile cutter through the knife roller shaft. Move the knife's hook to the material and tear it off. The blade of the tire recycling machine roller cuts solid waste like scissors. The crushing data and pre-screening data are discharged from the bottom of the shredder.

  Features:

1, tire shredder has the characteristics of low speed, high torque and low noise. The PLC control system can be used for automatic control. With start, stop, reverse, overload automatic reverse control functions.

2, the motor + reducer drives the cutter shaft to complete the shearing effect of low speed and large torque.

3. The bearing has six seals, which is useful for blocking water and dust and increasing bearing life.

4. After the tool is worn, the tool coating and welding repair technology are selected to complete the repeated use of the tool, which greatly reduces the maintenance cost of the tool.

5. The plan of the lifting box can easily and quickly disassemble the entire shaft (shaft, blade, bearing, seal system).

6. Tire shredder tools are placed in a spiral to complete high-efficiency cutting.

7. Hexagonal planning is adopted for the inner hole of the tool and the main shaft surface to complete the uniformity of the force on the tool.

8. Different types of knives can be selected according to the different raw materials and product shapes to be shredded.