How to install shredder

Installation instructions for the waste shredder: The waste recycling machine is used to prefabricate the foundation with concrete according to the foundation map, leaving embedded holes. Put the used tire shredder on the foundation, put all the anchor screws into the pre-buried holes, and then pour it with concrete. After solidification, level the tire recycling machine before installation. When installing, connect them according to the installation diagram. Then debug.

   When testing the machine, after connecting the waste tire recycling machine and the fan power supply, first adjust the forward and reverse rotation of the motor, and then install the belt. After the belt is installed, manually check whether the worn-out tire shredder is normal before commissioning. After the test, the waste tire recycling machine is running normally. After half an hour, open the observation cover and check all the internal blade blades to avoid loosening and causing damage to the equipment.

   In the process of shredder operation, we can use some tips to make shredder operation more efficient, more convenient, and more secure. Don't panic when shredder encounters a fault. It is better to perform an investigation according to the following information, and then choose the appropriate solution according to the size of the fault. At the same time, remind you that regular maintenance of the machine can effectively prevent the failure.