Tire shredder is developing towards intelligence (2)

       Second, the thickness of the welding slider on the tire recycling machine base is uneven. Causes the measurement error, which causes the contact between the adjustment wedge and the base to be not vertical, causing the liner to fall off. In this case, the slider of the base should be repaired to ensure that it can rise or fall vertically in cooperation with the liner base.

       3. The tie rod is damaged or the nut comes out. The tie rod needs to be replaced and the nut of the tie rod must be re-tightened.

       4. The hardness or toughness of the broken material exceeds the specified range. In this case, broken materials that do not meet the specifications should be cleaned up.

       Fifth, the motor wiring position is reversed. Correctly connect the motor wiring position of the tire shredder.

       6. The liner is shifted. The position of the liner should be adjusted in time.

       The tire recycling machine produced by Yuxi Machinery is a multi-purpose device. It uses the traditional process as the technical guide and shreds the material through an integrated one-time shredding operation to provide a high-quality raw material basis for its deep processing. Yuxi Machinery has a tire shredder R & D and production team, which can design a more reasonable material recycling treatment program for free according to the customer's production needs.