Shredding machine which good, find Yuxi

Roller tire shredder a nickname, also known as double roll crusher, equipment simple structure, less crushing phenomenon, tooth shape, size, are arranged on the surface of the roller can change along with the nature of the material, available for mining, chemical, cement, refractories, abrasives, such as building materials in the industrial sector and finely various kinds of high, medium hardness of ore and rock. So recently more and more users are asking: where can you sell roller tire shredder? To solve this problem, today's small series will recommend a better manufacturer of tire recycling machine for rollers -- zhengzhou Yuxi. Why do you recommend this manufacturer? The following is a detailed introduction for everyone.

Zhengzhou Yuxi roller tire shredder is composed of roller wheel, roller wheel support bearing, pressing and adjusting device and driving device, etc. Its structure design is reasonable and at the beginning. For example, adjust the discharge particle size of roller tire recycling machine: a wedge or gasket adjusting device is installed between two roller wheels, and the top of the wedge device is equipped with adjusting bolt. When the adjustment bolt pulls up the wedge block, the wedge block pushes the movable roller wheel off the fixed wheel, which is convenient and fast.

During the operation of the tire recycling machine, the broken material will fall into the two rollers through the feeding port to crush and break, and the finished material will fall naturally. In case of hard or unbreakable, the roller of the roller crusher can automatically yield by the action of the hydraulic cylinder or spring, so that the gap of the roller increases, hard or unbreakable fall, so as to protect the machine from damage. There is a certain gap between the two rollers rotating in the opposite direction. By changing the gap, the discharge particle size of the product can be controlled.

During the operation of the tire recycling machine, the broken material will fall into the two rollers through the feeding port to crush and break, and the finished material will fall naturally. In case of hard or unbreakable, the roller of the roller crusher can automatically yield by the action of the hydraulic cylinder or spring, so that the gap of the roller increases, hard or unbreakable fall, so as to protect the machine from damage. There is a certain gap between the two rollers rotating in the opposite direction. By changing the gap, the discharge particle size of the product can be controlled.