How to solve the problem of waste metal shredder blocking material (2)

2, waste metal shredder hammer pieces, aging, screen mesh closed, broken, smashed material moisture content will cause the pulverizer to block. Broken and severely aged hammers should be regularly updated

sheet. The feed rate is too fast and the load is increased, causing blockage. During the feeding process, always pay attention to the large deflection angle of the ammeter pointer. If the rated current is exceeded, it indicates that the motor is overloaded and overloaded for a long time, which will burn the motor.

In the above situation, the material door should be reduced or closed immediately. The feeding method can also be changed, and the feeding amount can be controlled by adding a feeder. To make the scrap metal crusher work well for a long time, use the waste metal shredder equipment. Only the correct use and maintenance can use the scrap metal crusher.

The waste metal shredder regularly cleans the machine, checks and repairs the work as a work item, and implements it to the person, so that the scrap metal crusher equipment can achieve better work efficiency.