The importance of scrap metal hammers

Hammerheads are a very important part of scrap metal crusher equipment, and the shredding of materials is usually done by it. The hammers used in the scrap metal crusher equipment used in the past are mostly lightweight and small in size, and the shredding effect is relatively low.

With the continuous development, the structure of the hammer head has been greatly improved, and the shredding effect of the scrap metal crusher has been greatly improved. The improvement of the hammer head structure can be seen from the working principle of the scrap metal shredding equipment.

The hammer head is the main component of the waste metal shredder equipment. The stronger the impact capacity of the hammer head, the better the effect of shredding the material. Therefore, the design of the hammer is an important part.

The structure of the hammerhead was modified and improved. The structure of the hammerhead was compared. The thickness of the improved hammerhead was increased by 15mm before the improvement, the width of the end of the hammerhead was increased by 20mm, and the length of the hammerhead suspension hole to the end was increased. 10mm, the radius of the outer diameter of the hammer head suspension is changed from 90mm to 75mm.

Improvement effect The impact force of the hammer head on the material increases the center of gravity of the hammer head to move outward in the swing diameter. The linear speed of the hammer head increases during the operation, and the impact force of the hammer head on the material also increases, thereby enhancing the scrapping of the scrap metal. The shredded effect of the waste metal shredder.