Dry and wet systems for metal shredders

The waste metal shredder uses the basic principle of hammer hitting. The loading port is equipped with a filter belt. Under the drive of the high-speed and high-torque motor, the hammer on the main rotor alternately hits the object to be crushed into the cavity and passes through the lining. The space formed between the plate and the hammer head tears the object to be broken into a crushed product of a specification.

According to the working condition of the scrap metal crusher, it can be divided into dry system, wet system and semi-wet system. The dry system mainly means that the crushed material must pass through the air cyclone sorting system to separate the metal from the non-metal, and the whole system is equipped with a dust removing device. A wet system refers to water spray while being crushed, and is rinsed while being sorted.

The waste metal shredder combines slicing and smashing into a high-performance, low-power device. This series of scrap metal crusher is suitable for mobile work, and is widely used in the preparation section of small and medium-sized metal steel recycling production enterprises, and can also be used for self-employed metal products.

The waste metal shredder has the highest frequency of purchase in the industry, and is also widely used in many shredders. It shows a strong advantage in the process of shredding, allowing the material to be effectively shredded.