Scrap metal shredder brings you a new manufacturing experience

The waste metal shredder completely tears the scrap metal falling into the crushing chamber through the drilling blade, and the metal is finely broken into particles to meet the requirements.

At the discharge port of the waste metal shredder, a mesh mesh structure is also installed. Materials that meet the final grain size requirements can be discharged through the screen, and materials that do not meet the particle size requirements are reground in the crushing chamber.

Therefore, when using the scrap metal crusher for production operations, the gap between the blade and the screen and the size of the bottom hole of the screen should be reasonably adjusted according to the specific needs of the production to ensure that the production equipment meets the requirements of the finished product.

By using the screen bottom gap control, when the gap between the blade of the scrap metal crusher and the bottom of the screen is too large and the hammer head and the bottom of the screen and the bottom of the screen are large in diameter, it is suitable for coarse crushing. Material: Production of spherical metals. The mass has a large diameter and vice versa.