Operate the tire shredder strictly in accordance with the work and operation regulations

The tire shredder is designed according to the actual situation in China, research and development, technical maturity and advanced equipment design, providing reliable and reliable equipment for domestic tire recycling.

Failure of the tire shredder during operation is a major factor affecting reliability. A tire shred mechanical failure is a condition in which a complete set of operations may be completely lost under certain circumstances.

The tire shredder starts the equipment after the power is turned on, confirms the normal operation, and then puts in the material that needs to be shredded. After the material in the knife is shredded completely, the new material is put into use.

Once the blade is stuck, turn off the device and turn off the power before processing.

Only after the fault is processed can the device be started again. After the material is shredded, the switch is turned off, the power is turned off, and then the knife and the crushing bin are opened, the remaining materials in the crushing bin are cleaned, and the crushing bin is closed.

The fixing screws are tightened, and the rubber is torn. The classification is loaded into the woven bag and placed in the designated location of the workshop to clean the equipment machine and the surrounding floor.

During the operation, it is strictly forbidden to shred the tire too much to cause the card to die and burn the motor. During the operation of the equipment, it is strictly forbidden to put the hand into the shredder for operation, so as to avoid injury, and it is strictly forbidden to put hard objects and the like. Something is placed in the shredder to cause damage to the blade. It is strictly forbidden to place water bottles, scissors, blades and other debris on the equipment to prevent foreign objects from falling into the feeding port to damage the equipment, and to regularly lubricate the operation parts.

The tire shredder is designed according to the actual situation in China, research and development, technical maturity and advanced equipment design, providing reliable and reliable equipment for domestic tire recycling.

Tire shredder is our company introduce advanced technology research and absorbing and second-generation product. At the general temperature, can be put directly into the tyre antrum coarse crushing into 50 * 50 mm block, so the next rotating can grind into 10-30 meshes tagma or wire and fiber separation equipment.

We also produces the entire production line for tire recycling machine, namely the tire recycling plant.