What problems should we pay attention to when the tire shredder is operated?

Tire shredder is a machine that is used as a fine crusher and is typically used to treat used tires to make them smaller.

What should we pay attention to when operating the tire shredder?

1. Always check the connecting bolts, especially the square head bolts that fix the toothed plates to prevent loosening.

2. Regularly lubricate each bearing bush, large and small gears and shaped gears 1- 2 times to ensure sufficient lubricating oil inside the bearing bushes to reduce excessive wear of the sleeves and gears.

3. The feed particle size should not exceed the specified size, and the feed should be continuous and uniform to prevent the occurrence of blockage.

4. Always check the temperature of the backup bearing, the temperature rise of the bearing bush should not exceed 25-30 degrees Celsius

5. The bearing slide of the moving roller should be cleaned frequently to remove dust and miscellaneous materials and prevent the material from entering the moving roller and causing an accident.

6. In the event of a sudden power failure, the power of the motor must be disconnected, and then the shredded material in the shredder must be taken out to prevent the tyre recycling machine from cutting off the safety pin due to excessive load during starting.

7. When it is found that the safety pin is cut off, the power supply should be cut off immediately to prevent the large pulley from being idle for too long on the sleeve, which may cause excessive wear on the surface or even cause a shaft hung phenomenon and other accidents.

8. Operators must strictly implement safety technical operating procedures to prevent random operation and prevent personal and machine accidents.

Yuxi Machinery is a supplier and manufacturer of solid waste recycling equipment such as tire recycling machine.

Yuxi Machinery—a professional enterprise dedicated to the recycling and recycling of used tires for 21 years.