What are the main aspects of the tire shredder in the test process?

It is necessary to carry out the test operation in the process of purchasing the tire shredder. Then, what aspects should be mainly seen in this process?

Let's analyze and understand together.

1. Observe whether there will be repeated slippage after the raw material enters the tire shredder.

If this happens, the blade gap of the twin-shaft shredder is not suitable or the process design is unreasonable.

Generally speaking, the smoother the feed and the better the processing effect, the higher the quality of the corresponding shredder.

 

2. Listen to the working sound.

During the normal production of the tire shredder, the blade will make some relatively brittle sounds when the material is shredded.

If the noise in the test machine is relatively large or there is another abnormal sound, then the component is not installed properly or the material is not good.

 

Yuxi Machinery's tire recycling machine is forged with high-strength steel, which has the advantages of low energy consumption and high output.