What are the replacement requirements for the shredder reducer?

The main purpose of the reducer in the tire shredder is to reduce the speed and increase the torque.

The deceleration reduces the inertia of the load.The reduction in inertia is the reduction ratio.Therefore, the combination of the tire shredder and the reducer allows the shredder to have low speed and high torque, which improves production efficiency.

But what should we do if a reducer needs to be replaced?

The tire shredder reducer needs to be replaced:

1. Unscrew the screws on the outside of the reducer flange.Adjust the clamping ring of the PCS system,align the side holes with the dust holes and pierce the hexagon socket, tighten.Then, remove the motor shaft key;

2. Connect the motor to the gearbox.When connecting, make sure that the output shaft of the reducer is parallel to the input shaft of the motor and the outer flanges of the two are parallel.

3. Before installing, confirm that the motor and reducer of the tire shredder are in good condition.And It is necessary to strictly check whether the dimensions of the parts connected to the motor and the reducer match.

The tire shredder reducer has high transmission efficiency, low energy consumption, superior performance and high precision.If it is not maintained or maintained for a long time, it will cause damage to the reducer.

Yuxi mechanical tire recycling machine are equipped with hardened gear reducers or planetary reducers to meet your different requirements for product quality and machine output.