How to solve the "incitement" of the tire shredder?

The start-up operation of the tire shredder is divided into the power part (electric control, motor and reducer) and the mechanical part (blade, cutter shaft and crushing chamber).

The start of the tire shredder is driven by the mechanical properties formed by the rotation of the motor and the dynamic torque of the output of the reducer.

When the tire recycling machine is running, vibration is inevitable, but if the vibration amplitude of the machine is too large, it will affect the normal operation of the machine.

How to solve the "sound dysfunction" of the shredder?

1. First we check from the power section.

If the machine makes a low sound, it may be a problem with the wiring of the motor;

If it is a percussion sound, it may be caused by an increase in the gear wear clearance of the reducer. The gear needs to be replaced, and the oil is added.

2. Next check the mechanical part.The main components of the mechanical part are the blade, the cutter shaft and the fixed knife.

   If there is friction between the blades, there will be sharp clicks;

   If the blade and the cutter shaft are loose, the tire shredder has a sloshing sound.

   It is best to stop the inspection when the tire shredder has an abnormal sound.If it is not the above problem, it is best to ask the professional staff to guide the repair, do not disassemble the machine in private.

 

 

Yuxi Machinery is a supplier and manufacturer of solid waste recycling equipment such as tire shredder,tire recycling machine.

 

Yuxi Machinery—a professional enterprise dedicated to the recycling of used tires for 21 years.