What should we do if there is debris inside the shredder?

The tire shredder relies on the hydraulic system in the process of operation, but there are always some impurities entering the inside of the equipment, which hinders the normal operation of the equipment.

We must find ways to deal with these problems and make early precautions to save more time for the normal operation of the tire shredder.

Clean hydraulic fluid is the primary guarantee for the proper operation of the shredder hydraulic system.

Always check that the hydraulic fluid is clean when adding hydraulic fluid.Because some solid impurities are most likely to pass through the hydraulic fluid into the entire hydraulic system.

 

If there is no doubt about the hydraulic oil, then it is necessary to check whether the equipment for refueling has impurities and whether the hydraulic components are desmearing.

In order to avoid problems in the hydraulic oil filling process, filtration equipment should be used when filling the hydraulic system to reduce the possibility of impurities affecting the operation of the machine.

 

This gives the operator a wake-up call. The usual tire shredder operation must pay attention to the details.

The filter of the fuel tank of the hydraulic system must not be removed and then refueled,which Although increases the speed of oiling, but for a long time, it is a safety hazard for the hydraulic system. The impurities are piled up for a long time, and one day it will definitely cause problems in the machine due to the blockage.