Notes on shredder

In today's rapidly developing society and the rapid development of industry, the recycling and utilization of resources are also advocated by the state. Rubber shredders can effectively help shred waste rubber and tires, which greatly reduces the cost of rubber raw materials. What should we pay attention to when using plastic shredders?

1. Before we use the rubber shredder, we must conduct an inspection around the fuselage equipment to check whether the screws are firmly installed; check whether the motor circuit is connected correctly and whether there is leakage.

2. When the rubber shredder starts, listen for strange noises in the machine. If there is noise, you should immediately stop and check to see if the belt is loose; whether there are foreign objects inside the fuselage, whether the rotor blade hits the fuselage lining plate, bearings Whether the position is badly worn.

3. If the waste metal shredder body vibrates violently when the machine is working, check whether the screws of the shredder body are firm; the blades on the rotor have the same weight for each group. 4. If the motor speed exceeds f inch, you should check whether the voltage is too low. Whether the material is uniform to avoid damage to the motor.