informations of waste tire recycling machine

Waste rubber tire recycling machine consists of tire broken machine host and auxiliary machine two parts. Auxiliary equipment: Hook Wire Drawing Machine, Tire Cutter Machine(Optional according to tire size), Conveyor, Magnetic Separator Machine, and other components.
We can design the machine planning drawings according to your site.

Working flow of waste tire recycling machine:

Waste tire---Wire drawing machine---Rubber shredder--- Steel wire separating machine---magnetic separating ---Rubber powder.

1. Steel wire drawing machine--extract the thick steel wire.
2. Conveyor-Transport the tire to the shredder.
3. Twin-shaft shredder--Shears the tire into 5- 10cm blocks;
4. Recirculation system--To control the size of shreds going to the rapers; 
5. Raspers-Reduce the shreds into 15. 20mm chips and liberates steel from the rubber;
6. Over belt magnet--Separation of liberated steel from the rubber chips;
7. Vibratory feeder--Transports the rubber chips;
8. Rubber granulator machine--Size reduction of the chips to 1-4mm granules and liberates the textile fraction to air flow separation.
9. Grinder machine --Grinder rubber powder. 
10.Central de-dusting unit--Remove dust and fines from the system and filter the air before returning it to the atmosphere.