How to maintain the tire shredder bearing

The length of time the machine is used is related to its own quality on the one hand, and it is related to maintenance, whether to maintain and the frequency of maintenance. The same is true for large tire recycling machines. I previously introduced "How to maintain tire recycling machines" to everyone. Today, I will tell you about the maintenance methods of bearings in detail:

1. When removing the bearing for inspection, pay attention to the appearance records. Mobile phones, cameras, etc. can be used. Then confirm the remaining amount of lubricant and sample the lubricant. Next clean the bearings.

2. The cleaning of the bearing is divided into rough washing and fine washing, and a metal mesh rack is placed on the bottom of the used container.

3. For rough washing, remove grease or stickies with a brush in oil. At this time, it is better not to rotate the bearing. When you have to rotate, you must be careful to damage the rolling surface with adherent foreign matter.

4. During fine washing, slowly rotate the bearing in oil and proceed carefully.

Generally used cleaning agents are neutral, do not contain water, diesel or kerosene, and sometimes use mild lye as needed. No matter what kind of cleaning agent is used, it must be filtered frequently to keep it clean. Immediately after cleaning, the bearing is coated with anti-rust oil or anti-rust grease.

5. After the bearing of the tire recycling machine is cleaned, put the grease on the bearing part of the tire shredder and seal it.

Have you got the maintenance method of the tire recycling machine bearing? I hope you can improve the service life of the machine and reduce the cost through the correct maintenance method.