Tire shredder takes care of the details of the maintenance

Customers who have already purchased equipment from our tire shredder manufacturers, we all want to maintain its working efficiency, use effect and life. Our company reminds users to carefully carry out detailed maintenance work on this equipment. Only by maintaining the maintenance of the used tire shredder equipment can it be used with the same power as brand-new equipment. As we all know, mechanical equipment and other machines or vehicles are the same. If you buy a new car, you often do not wash the car, do not maintain it Maintenance of accessories, then even high-end cars will shorten its use time, the more difficult to drive.

  Regardless of the industry equipment, the quality is the best when you buy it. If there is no good maintenance in the later stage, the performance of this equipment will inevitably decline, and the waste recycling machine will be properly maintained to prolong its service life. The timing of maintenance, that is to say, when the equipment should be maintained, users ignore this stage. Not only will it increase the labor burden of the entire tire recycling machine production line, but also bring a lot of inconvenience to the maintenance work. Technicians analyze the details of maintenance for you.

  First of all, no matter what type of tire recycling machine the customer has purchased, it is necessary to conduct a power-on test machine before the equipment is put into production. This is to test whether the power consumption of the supporting motors and auxiliary equipment is normal. We can officially put the tire shredder into production for other parameter tests. Secondly, test the transmission function of the tire shredder. This test is mainly to check whether the power transmission of the equipment is satisfied with the shred effect of the rotor.

  At the same time, don't forget to check the lubrication status of the transmission bearings, gears and other components. If you find that the machine is stuck during work, you must replenish it in time to avoid mechanical rotation and wear caused by bearing lubrication failure. It is necessary to check the shred cavity of the equipment. If there is residual material in the cavity, it should be cleaned up immediately to prevent the feed shroud failure of the next production of the tire shredder.