Tire shredder is the main vehicle for garbage disposal

The tire shredder has become the main equipment of the large-scale waste crushing and sorting system. The tire shredder consists of the main structure of the motor, hard tooth surface reducer, rotary knife shaft, moving knife, fixed knife, rack, base, box, working platform, etc. Composition, Yuxi Machinery tire recycling machine is designed and manufactured with biaxial shear crusher.

  The tire recycling machine has achieved volume reduction and reduced solid waste harmless treatment. Experts point out that general waste sofas and furniture must be broken into small sizes before being put into a boiler for incineration, and thermal energy has been obtained. This requires Yuxi machinery The tire recycling machine can be improved based on the material characteristics of large pieces of waste in each region to develop a tire recycling machine suitable for the local area.

  Before starting the test run, strictly check whether the installation of all parts of the machine meets the requirements, whether the screws and bolts are loose, and you can use the hand to gently pull the belt to test the rotation. In the production, uniform cutting should be maintained to ensure the crushing quality and normal production. At the same time, motor overload is strictly prohibited to ensure the normal operation of the tire shredder.

  In addition to frequently checking the looseness of various parts, you should also pay attention to checking the wear of the wearing parts. If the wear is severe, you should replace it in time to avoid damaging the main components and take necessary fire prevention measures. In addition to being strong, at the same time, good lubrication should be maintained to maintain the normal operation of the tire recycling machine. Generally, it is normal for the bearing temperature to not exceed 70 degrees. The bearing of the main engine is added with butter and molybdenum disulfide once a week, and the high-speed butter effect is better.