Wear of tire shredder seals

As we all know, tire recycling machine will inevitably produce dust in the consumption project. Therefore, the equipment needs to be equipped with corresponding sealing equipment. The sealing effect cannot be avoided during the shredding process of the garbage. What is the reason for the damage of the seals? What impact will it have?

Damaged seal

1. Seals are severely worn. If the gap between the tire shredder parts becomes smaller, the seal will be crushed and deformed and suffer severe wear. It may be that when replacing the worn parts, the replacement period of the seal is not consistent with the wear period of the conflicting parts, so the new and old levels are different, so the sealing pinch force of the rubber seal is increased, and some deformations are warped. Damaged seal.

2. The second step. Seals are aging. Rubber seals are affected by factors such as oil quality, temperature, and time during use. In addition, improper selection of the material of the seal ring has caused a simple aging phenomenon, which makes the seal ring body elastic and changes the seal shape, thereby causing the sealing effect of the device. Causes of seal failure

 

Deformed seal

 

1. Stress and deformation. When the crushing wall of the tire recycling machine and the rolling mortar wall crush the ore, the crushing force is small, causing the body to tilt or vibrate, the seal is deformed from the original moving track, the original seal shape is changed, and the sealing effect of the equipment is formed.

 

2. The second step. Improper equipment installation and maintenance. When the tire recycling machine is installed, repaired and remodeled, the seals will deform, resulting in the sealing effect of the equipment.

 

Poor lubrication. The conflicting parts are easy to mix with metal particles and ore dust, and perform temporary tasks in a low temperature environment, which deteriorates the lubricating oil, has poor fluidity, and is difficult to add and cause deformation.

In the process of running the tire shredder, you may never notice the problem of the seal ring, but it will accumulate small problems into big problems in daily work. Therefore, the problem of tire recycling machine seals must be closely monitored and cannot be ignored