Shredder blade use precautions

Tire shredder is a device used for coarse shredding of used tires. Waste tires come from the replacement of automobiles and the dismantling of scrapped cars. These tires are a kind of rubber resources that can be recycled. If they can be fully recycled, the amount of resources can be reduced. Therefore, waste rubber Recycling can save us a lot of resources. The manual crushing of tires is too inefficient if manual labor is used, so now all tire recycling machine equipment is used, which can greatly improve the work efficiency and save manual labor.

In the long-term working process of tire recycling machine, because the rubber of the tire has greater toughness, it will cause uneven wear on the blade when the force is uneven during shredding. The gap is increased, causing the shredder to work unevenly, which will cause vibration to cause greater wear and tear, causing the shredder to reduce its workload and severely damage the rotor shaft. Therefore, in this case, it was found that Perform maintenance in a timely manner. You can adjust the clearance of the shredder by grinding the inner arc of the blade and then changing the spacer between the blades, so that you can continue to use normal use, and the cost of directly replacing the blade is too high.

When tire recycling machine manufacturers produce equipment, they are all high-hardness alloy forged blades. As long as high-strength materials are not mainly used to damage the blades during use, the blades have a long life. Therefore, in the production process, pay attention to sorting out materials with high hardness materials, and check and maintain the blade after stopping. This will not reduce production.

When tire shredder manufacturers leave the factory, they have carefully debugged the tire recycling machine, and they are responsible for each user, and will not let customers use the equipment that is not running smoothly.