The main purpose of the reducer is to reduce the speed

Tire recycling machine is relatively slow, which is a unique feature of the device. The speed of the tire recycling machine can be adjusted. The corresponding speed can be adjusted according to different materials. For materials that are more easily shredded, tool speed can be adjusted faster, such as scrap and light metal materials. These materials can be shredded, and the speed of the pulverizing tool can be quickly adjusted, increasing the speed, increasing the output value, saving energy, improving efficiency and reducing energy consumption.

For the surrounding materials, we can adjust the speed of the tool to be slower than the speed, instead of crushing the woven bag, waste wires and cables, etc., adjust the speed of the crushing tool in time to increase the bite strength and split. It can also smash surrounding materials faster. It is very scientific to adjust the speed of the cutter according to different materials. Sometimes the output can be increased to prevent unnecessary wear on the tool and extend the life of the tire shredder.

The main purpose of the reducer in tire shredder is to reduce speed and increase torque. In a tire recycling machine, speed decreases and output torque increases. Multiply the torque output ratio by the motor output (but not exceed the torque). Deceleration reduces the inertia of the load. The reduction in inertia is the reduction ratio. Therefore, the combination of the tire shredder and the reducer provides low and high torque to the shredder, thereby improving production efficiency.

Tire recycling machine reducer has the characteristics of high transmission efficiency, low energy consumption, superior performance and high accuracy. If it is not used for maintenance for a long time, it can also cause damage to the gearbox due to one or the other problem. Replace the reducer with a tire shredder. This way, the gearbox can replace your golden rule, so you can easily get replacement work.