Pay attention to the use and maintenance of the blade

The use of tire recycliny machine blades is very particular. In particular, the tire recycling machine blades are exquisitely made using high wear-resistant cold grinding processing technology, so there are certain precautions when using them. Because the blade body has very good strength and toughness, it can also easily cut some thinner metal materials in actual use.

But it is worth noting that some thicker metal materials are not easy to cut with the blade of a tire recycling machine, which will easily damage the blade. Because the material of the material does not agree, the tire shredder blade is always easy to dull in actual use.

At this time, if the blade is found to be bad, it should be removed immediately. In order not to affect production, replace the blade with a new one and continue processing. Old blades will need to be repaired.

Pay attention to the cutting edge of the blade when grinding. Because of the special reasons of the structure of the tire shredder, when grinding, it is necessary to use a machine tool to grind the inside of the blade edge, so that a sharper blade can be ground.

 The blades are very easy to grind, especially some blades with multiple claws are relatively cumbersome to repair. At this time, we must pay attention to the relationship between the arc of the blade and the grinder. At this time, the better method is to use arc polishing Because this will protect the arc of the shredder blade well.