What should pay attention using tire shredder at high temperatures?

  How to keep the dual-shaft tire recycling machine motor working at high temperatures to get through the hot summer? Ordinary objects should not be exposed to the sun, let alone a biaxial tire shredder that works with us. The tire shredder is an important equipment for waste treatment, and the motor is the basis of the equipment. Assuming the motor is damaged, the equipment will not work properly, so the components of the motor should be protected.

  How to correct the shortcomings of the dual-axis tire recycling machine

  1. The job of the motor department is to check whether the motor bearings are excessively worn or the equipment is defective. This constitutes friction between the stator and the rotor, which damages the surface of the core and thus creates a short circuit between the silicon steel sheets, which increases the iron of the motor. Damage and cause excessive motor temperature. At this time, use fine enamel to remove burrs, short the silicon steel sheet, clean and apply insulating varnish, and dry the heat.

  2. When working under high temperature, check the connection between the motor core and the base in time, and tighten the original positioning screws. When the positioning screw fails, you can re-drill the tapping positioning hole on the base and tighten the positioning screw. Bearing defect repair The rotating shaft is subjected to a large load by the bearing box, and some parts are abrasive.

  With the development of science and technology, the knowledge of metal fracture has also made progress. Large particles of metal can be obtained by various crushing methods, and metals of several microns can be obtained. In industry, the currently widely used metal crushing methods are still mechanical crushing, mainly kneading, splitting, crushing, grinding and impact crushing. At present, non-mechanical crushing has not been applied to large-scale industrial production.