How to enhance the wear resistance of tire shredder

It is inevitable that some tire shredder will wear out during the production process. This situation has a certain impact on the service life of the shredder equipment itself, so enhancing the wear resistance of the tire recycling machine has become a non-negligible existence. Today, Yuxi Machinery takes everyone to understand in detail how to enhance the wear resistance of the tire recycling machine.

The tire recycling machine reduction gear motor uses a direct-connected worm gear reduction motor, which is directly installed on the drive shaft of the grinder. It is transmitted to the driven shaft through variable speed gears, so that the helical gear cutter on the driven shaft forms relative motion. The spiral tooth cutters on the main and driven shafts are staggered, so that after the material enters, it is simultaneously squeezed, torn, and sheared, so that the material is broken. Since most of the metal materials that need to be broken are brittle and hard, the internal parts of the chip breaker, pinion, and iron sieve must be made of hard-wearing, hard-wearing steel. A flywheel is installed on the main shaft, so that the main shaft has a large torque when the iron fragments are broken. In addition, the spindle is best driven by a hydraulic coupling to eliminate excessive peak currents from the motor and absorb spindle vibration. When the cutting machine is used to break the cuttings of high wear-resistant materials (such as bearing iron shavings), the rotor must also be surface-welded to enhance its wear resistance.