Understanding tire shredder

First of all, this machine belongs to a type of tire shredder. The tire recycling machine is divided into large, medium and small with low power consumption and low price. It is an ideal tire shredder equipment. And our company provides free on-site installation services. According to the requirements and suggestions of customers, the heavy industry company can equipment and process the equipment model that is most suitable for your business, so that you can use our tire shredder without worry.

When the tire recycling machine is working, the material can be fully and effectively shredded in the crushing cavity. The shredder produces high output, low energy consumption, high efficiency, and the whole system of the tire shredder is equipped with a dust removal device. The shredder production process will be The dust pollution hazard generated in the process is minimized, so when using the equipment, it has the characteristics of low noise, no pollution, simple operation and convenient maintenance.

Working principle of tire recycling machine:

One: Use dual or single-axis low-speed rotation, use the shredder's blade to cut, cut, tear, pull, etc. the shredder. The shredder is directly mounted on the shredder's drive shaft and passes through the gear. The speed is transmitted to the driven shaft, so that the driving shaft of the shredder and the stationary cutter head on the casing form relative movement. The spiral cutter disks on the active shaft of the shredder are staggered, so that the materials can be squeezed, teared and sheared at the same time after entering, so that the cans can be broken.

Second: The high-speed rotating impeller is used to tear and tear the long can. The high-speed rotating (about 1440 rpm) main shaft is connected with a plurality of circular steel plates in series. The circular plate of the shredder is connected to the main shaft to rotate. Around the circular plate are 4 to 6 small gears made of manganese steel. The small gears can rotate freely on their own small shafts. Long and chaotic metal shavings enter the shredder from the top port. The high-speed rotating gear is shredded and shredded into small pieces, and then flows out from the sieve hole at the bottom of the shredder. The size of the sieve hole can be selected according to the size of the broken particles required by the can.