What should I do if the shredder always jams (2)

   2. The equipment configuration is unreasonable, such as using a 800-type tire shredder. If the power is small, use two 6-pole 37kw motors. Otherwise, the material will definitely be stuck.

   3. The use of the reducer is unreasonable. The tire recycling machine is a low-speed device. The lower the speed, the greater the torque. If the speed ratio of the used reducer is unreasonable and the speed is too high, the torque cannot be achieved It will be very easy to jam.

   4. The current overload protection device of the distribution cabinet is not adjusted properly. There will be two current overload protectors inside the distribution cabinet of the tire shredder. You can adjust the overload current yourself. If the current value is adjusted too small, it will be very easy to reverse. Phenomenon, easy to jam.

   The tire recycling machine produced by Yuxi Machinery is a multi-purpose device. It uses the traditional process as the technical guide and shreds the material through an integrated one-time shredding operation to provide a high-quality raw material basis for its deep processing. Yuxi Machinery has a tire shredder R & D and production team, which can design a more reasonable material recycling treatment program for free according to the customer's production needs.