Tire shredder hydraulic system maintenance (2)

02 Part II: Regularly check if the heat exchange unit is working properly

The tire recycling machine hydraulic system is like a "long-distance runner". If there is a problem with its heat exchange system, it can't "sweating" to lose heat and maintain temperature balance, then its "running movement" must stop.

Regardless of whether the heat exchange unit is selected for water cooling or air cooling, a clean matching heat exchange medium must be used, otherwise the heat exchange unit itself cannot be stably operated for a long time. Of course, the hydraulic system it serves has to stop and calm down.

03 Part III: Regular exhaust

Many people seriously underestimate the danger of air in the hydraulic system of the tire recycling machine. If the proportion of air in the oil is too high, when the hydraulic pump passes through, it will produce "cavitation" and "cavitation", damage the hydraulic pump and produce metal particles. A large amount of metal particles is catastrophic to the hydraulic system. It is possible to directly "end the life" of the hydraulic system.

For the exhaust of the tire shredder hydraulic system, you may not know how to operate. Conscience Xiaobian friendship sharing: The oil dissolved in the oil tank can be heated to 60 ° C and allowed to stand overnight; in the process, you will find that a large number of bubbles slowly emerge from the liquid surface, dissipate . The pressure shunt joint of the tire shredder hydraulic system can also be used as the exhaust point, but this type of operation must be performed by professionals, safety first.

04 Part IV: Regular pipe fastening and surface cleaning

This type of maintenance operation is actually a common part of the mechanical parts including the tire shredder, which helps prevent oil leakage and early detection of problems.