Four major causes of bearing damage

Do you have such a small problem in the middle of the operator's tire shredder, especially the machine tire shredder bearing is easy to damage? Why?

This will cause such a reason, Yuxi here for you to summarize the following four reasons for the damage caused by the machine tire shredder bearing.

First, the accuracy of the bearing

Normally, the bearings are installed at both ends. When installing, ensure that the smoothness and concentricity are better with each other. The bearing bending state is subject to load and the bearing is easily damaged.

Second, the bearing itself is inherently poor

Due to the current competitiveness of bearing enterprises, many companies are for the benefit of the moment. Most of the products produced are not up to standard, and customers do not use regular products. The problem of long life of tire recycling machine bearings is often not long.

Third, improper installation of the bearing

It seems that the bearing is very inconspicuous, but it plays an important role in the operation of the machine's tire recycling machine. At the same time, the requirements during installation are also very strict. The bearing balance must be maintained during installation, the smoothness of contact with the shaft, and the gap between the two. The degree of tightness should be controlled. If the method is not noticed during installation or disassembly, the bearing will be damaged.

Fourth, bearing lubrication

Bearing lubrication is a necessary work, and lubricating oil is a good tool for extending the life of the bearing. In the operation of the tire recycling machine, if the bearing does not add lubricating oil in time,

This will cause the bearing to accelerate damage and is likely to be damaged by other components.