Tire shredder host part design

Tire shredder as the name suggests is to smash all kinds of used tires. If you want to choose the tire shredder, you can choose the host equipment to achieve satisfactory results. You should configure the corresponding tires equipment. Let me introduce the tire recycling machine to choose the equipment host.

The Yuxi tire recycling machine mainframe is designed with a thickened channel steel and a thicker design to ensure a more stable start-up. The main shaft adopts the national standard 45 steel straightening processing. The internal structure design adopts thick cast steel plate with a thickness of 5 cm (50 thick). All the hammers are cast with high-alloy alloy, the hammer rod 32 is thick and heat treated. All blades are cast with thick 60-wide and 50-thick high-manganese steel, and the quality is guaranteed.

Therefore, the purchase of products can not only look at the appearance, but also can not be heard to listen carefully, consult and ask, in order to ensure product quality.

Another point is that the weight of the tire shredder should be proportional to the price. The internal structure of the mainframe is wear-resistant and thick and good quality. Therefore, it is recommended that you pay attention to the internal structure of the product and the weight of the main machine and the stability of the test machine when purchasing the machine, so as not to be deceived. . Yuxi tire recycling machine equipment is equipped with 8m conveyor equipment. Nowadays, the labor is more expensive, so now it is automatically fed by the automatic 8m conveyor. This kind of feeding is safer and more reliable, and the feeding is even, saving time and effort. Heart, very large feature is safety, large tire shredder equipment is relatively high, more than three meters, not easy to feed, the use of conveyors is more convenient, and the conveyor can use two-phase 220V electricity, no industrial electricity, can Save industrial power.