Uneven material thickness after crushing

After using the waste metal shredder for a period of time, it was found that the particle size of the discharge was getting larger and larger compared to when the machine was purchased. At this time, you can check whether the scrap metal crusher is a problem with the screen, because the size of the grain is generally here. Take control.

After scrap metal, cans, paint buckets, bicycles, car shells and other scrap metal materials are crushed by different types of crushers, the discharge should generally be regular.

Under the high-speed impact force of the breaker, the screen will have a series of phenomena such as large pore size and cracking. At this time, it is necessary to carry out timely maintenance. If the area of the scrap metal crusher screen is not large, it can be repaired by riveting or soldering; if there is large area damage, the new screen should be replaced.

When installing the screen, the burr side of the screen should be facing inward, the glossy side facing outward, and the screen and the screen frame should be tightly attached.

At the same time, it should be reminded that the high-yield and too fast feeding of the waste metal shredder must be carried out. The material entering the crushing chamber at one time will lead to coarsening of the particles.