tire shredder bearing extended life (2)

3, bearing of tire shredder lubricant coating is also very particular about, covering all the roller surface when applying grease lubrication, after the application of the outer ring position recovery, you need to cover the dust with plastic film.

4, daily use should pay attention to cleaning the bearing of tire recycling machine, first put the bearing into the oil, then use the brush to brush the dirt on the bearing surface, then properly heat the oil, and then the ball inside the bearing and the hole Carry out detailed cleaning.

5, after the work of the tyre shredder for a period of time, it is necessary to check the tyre recycling machine regularly. Remove the bearing and if the bearing wears less, it can be turned on the lathe to the correct geometry. At the same time, pay attention to the gap between the eccentric shaft and the bearing bush and the mandrel and the bearing bush. If it exceeds 1.5 times, it should be replaced or padded.