What is the dust after shire shredder starts up?

It is normal to have a lot of dust on the recycled waste. But this will directly cause a lot of dust after the tire shredder is turned on. So, what should happen to this problem?

In fact, this is a situation that most shredders will encounter. We can use a dust collector for processing. The dust collector uses the motor to drive the rotation of the impeller, which generates a strong suction force to absorb the dust generated by the operation of the tyre shredder into a closed space to reduce the diffusion of dust and purify the working environment. So how does this duster work?

The dust collector is connected by a 38-55 mm diameter pipe and a tire recycling machine.

After starting up, the impeller of the precipitator begins to rotate, and as the rotational speed gradually increases, a very strong air suction is generated. The waste in the tire shredder begins to rotate.

As the machine continues to operate, dust is lifted up and absorbed into the precipitator by this powerful suction. There are a lot of enclosures around the dust collector to isolate the dust and collect the dust.

The problem of dust appearing during the operation of the tyre recycling machine has been solved. Is it very simple?

After the installation of the dust collector, not only does it have no dust when it is running, but the particles that are shot out are also very clean, and the better selling results can lead to higher profits.